This is very strange ! When I'm putting Adafruit_NeoPixel.cpp in C:\Program Files (x86)\Arduino\hardware\aurduino_Dx\aurix\system\libaurix\source and the Adafruit_NeoPixel.h in C:\Program Files (x86)\Arduino\hardware\aurduino_Dx\aurix\system\libaurix\include The H file is loaded correctly but the CPP and all changes in CPP is not working.
When I remove the H and CPP files from \Arduino\hardware\aurduino_Dx\aurix\system\libaurix\... and putting like a ordinary library in C:/program files/arduino/libraries/ than CPP changes are applied. May be the CPP file should be in other place? Can you please share the correct file path. Thank you
We have found a problem with Neopixel library. When you use .show() in setup, printing millis are stopped and so we are getting huge problems with other parts of the sketch. When you remove the .show() from setup, millis are printed correctly. We have tried to find the source of the problem but probably there is a problem with your version of the Neopixel Library. Can you try this to sketches please and check the serial return. NeoPixelStrandTest.ino (3.58 KB) NeoPixelStrandTest-Without_SHOW.ino (3.64 KB)