Mistake in User Manual for ShieldBuddy in pin mapping

DM
New Member

Working with the ShieldBuddy

Posts: 8

Mistake in User Manual for ShieldBuddy in pin mapping Aug 5, 2020 22:52:43 GMT

Quote

Hi,

I wanted to access all Arduino pins digitally and found some inconsistencies in the pin mapping between Arduino and TC275.

In "Table 5 - Arduino To ShieldBuddy To TC275 Mapping" both, D36 and D40 are connected to P33.2. But I found, that is is only connected to D36. Which Pin is connected to D40, then?
Furthermore, Analog Input 2 alias D56 should be connected to P32.1. But TC275 has no P32.1. Is there a port I can drive this pin with?

I am looking forward for your answers.

Greetings

DM

Admin Administrator Posts: 711	Mistake in User Manual for ShieldBuddy in pin mapping Aug 6, 2020 8:10:42 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Admin on Aug 6, 2020 8:10:42 GMT There are two mistakes in this table, which you have found. Apologies. D36 = P33.2, D40 = P33.0, Analog2 = P23.1/SAR4.5 The manual has been corrected.

DM New Member Working with the ShieldBuddy Posts: 8	Mistake in User Manual for ShieldBuddy in pin mapping Aug 7, 2020 16:51:09 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by DM on Aug 7, 2020 16:51:09 GMT I think I found another one: It seems like D20 and D21 are swapped in the manual. I think it should be D20 = 15.5 and D21 = 15.4