sinai1
Junior Member
Posts: 79 
|
CAN FD
Jan 25, 2021 13:53:03 GMT
Post by sinai1 on Jan 25, 2021 13:53:03 GMT
Can please share a example of CAN FD for arduino?
|
|
|
|
CAN FD
Jan 27, 2021 8:50:04 GMT
Post by Admin on Jan 27, 2021 8:50:04 GMT
Support for CAN FD is on the wish list. The ShieldBuddy TC375 hardware will support this and the ShieldBuddy TC275 with DC-step silicon is also compatible. The existing CAN driver for the Arduino IDE add-in is based on the Infineon iLLD driver. There is a CAN FD version of the iLLD driver so it would be possible to extend the existing Arduino-style basic CAN driver to support FD. MulticanFdDemo.zip (13.81 KB) MultiCAN.cpp (21.01 KB) MultiCAN.h (4.27 KB) |
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Feb 12, 2021 18:31:22 GMT
Post by sinai1 on Feb 12, 2021 18:31:22 GMT
Hi. Me again
When i try to compile I get this error:
TC275-Base-Arduino:140: error: undefined reference to `g_MulticanFd'
//********************************************************************************************************************
//Setup for Core2,
//********************************************************************************************************************
void setup2()
{
//Wait Serial debug to Init
delay(200);
/* create module config */
IfxMultican_Can_Config canConfig;
IfxMultican_Can_initModuleConfig(&canConfig, &MODULE_CAN);
/* initialize module */
IfxMultican_Can_initModule(&g_MulticanFd.drivers.can, &canConfig);
SerialASC.println("Prepare CAN Nodes\n");
/* create CAN node config */
IfxMultican_Can_NodeConfig canNodeConfig;
IfxMultican_Can_Node_initConfig(&canNodeConfig, &g_MulticanFd.drivers.can);
canNodeConfig.baudrate = 2000000; /* 2 MBaud */
/* Source Node */
{
canNodeConfig.nodeId = IfxMultican_NodeId_0;
canNodeConfig.rxPin = &IfxMultican_RXD0B_P20_7_IN;
canNodeConfig.rxPinMode = IfxPort_InputMode_pullUp;
canNodeConfig.txPin = &IfxMultican_TXD0_P20_8_OUT;
canNodeConfig.txPinMode = IfxPort_OutputMode_pushPull;
canNodeConfig.flexibleDataRate = TRUE;
canNodeConfig.fdConfig.nominalBaudrate = 500000;
canNodeConfig.fdConfig.nominalSynchJumpWidth = 8000;
canNodeConfig.fdConfig.nominalSamplePoint = 2000;
canNodeConfig.fdConfig.fastBaudrate = 2000000;
canNodeConfig.fdConfig.fastSynchJumpWidth = 8000;
canNodeConfig.fdConfig.fastSamplePoint = 2000;
canNodeConfig.fdConfig.loopDelayOffset = 0;
IfxMultican_Can_Node_init(&g_MulticanFd.drivers.canSrcNode, &canNodeConfig);
}
//CAN Init
///CAN0_Init(500000);
String_To_SerialDebug("CAN0 BUS init ok!");
//CAN3_Init(500000);
String_To_SerialDebug("CAN3 BUS init ok!");
//TX CAN Messages
CAN0_TxInit(0x100, 0x7FFFFFFFUL, 8, 11, 0);
//RX CAN Messages
//CAN3_RxInit(0x100, 0x7FFFFFFFUL, 8, 11, 1);
//Lin init
lin0.begin(19200);
String_To_SerialDebug("LIN0 BUS init ok!");
lin1.begin(19200);
String_To_SerialDebug("LIN1 BUS init ok!");
}
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Feb 15, 2021 18:17:11 GMT
Post by sinai1 on Feb 15, 2021 18:17:11 GMT
My Mistake, I will use the example to add CANFD to the Global Library, it will take a while but please wait for it I will Share it in here.
|
|
|
|
CAN FD
Feb 16, 2021 8:42:27 GMT
Post by Admin on Feb 16, 2021 8:42:27 GMT
g_MulticanFd is something from the original iLLD demo program! It is not essential.
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Feb 24, 2021 22:39:42 GMT
Post by sinai1 on Feb 24, 2021 22:39:42 GMT
Questions:
1.-
canMsgObjConfig.msgObjCount = 1; this is always 1??
2.-
canMsgObjConfig.control.topMsgObjId = 252; this ids need to be unique for each id msj like the msgObjId?
canMsgObjConfig.control.bottomMsgObjId = 253; Same here and why 2 per message?
I find this on the coda so i understand that CANFD need 3 MsgObjts IDs. please confirm.
IfxMultican_MsgObjId topMsgObjId; /**< \brief Specifies the ID of the message object with data byte 8 to 35. (CAN FD) */
IfxMultican_MsgObjId bottomMsgObjId; /**< \brief Specifies the ID of the message object with data byte 36 to 63. (CAN FD) */
Final Question in case my suspicion is rigth we are goind to need more IDs i can have more than 255 IDs on the NO_OFAVAILABLECANMESSAGESLOTS, wich is the maximun?
enum {
MsgObject0, MsgObject1, MsgObject2, MsgObject3, MsgObject4, MsgObject5, MsgObject6, MsgObject7,
MsgObject8, MsgObject9, MsgObject10, MsgObject11, MsgObject12, MsgObject13, MsgObject14, MsgObject15,
MsgObject16, MsgObject17, MsgObject18, MsgObject19, MsgObject20, MsgObject21, MsgObject22, MsgObject23,
MsgObject24, MsgObject25, MsgObject26, MsgObject27, MsgObject28, MsgObject29, MsgObject30, MsgObject31,
MsgObject32, MsgObject33, MsgObject34, MsgObject35, MsgObject36, MsgObject37, MsgObject38, MsgObject39,
MsgObject40, MsgObject41, MsgObject42, MsgObject43, MsgObject44, MsgObject45, MsgObject46, MsgObject47,
MsgObject48, MsgObject49, MsgObject50, MsgObject51, MsgObject52, MsgObject53, MsgObject54, MsgObject55,
MsgObject56, MsgObject57, MsgObject58, MsgObject59, MsgObject60, MsgObject61, MsgObject62, MsgObject63,
MsgObject64, MsgObject65, MsgObject66, MsgObject67, MsgObject68, MsgObject69, MsgObject70, MsgObject71,
MsgObject72, MsgObject73, MsgObject74, MsgObject75, MsgObject76, MsgObject77, MsgObject78, MsgObject79,
MsgObject80, MsgObject81, MsgObject82, MsgObject83, MsgObject84, MsgObject85, MsgObject86, MsgObject87,
MsgObject88, MsgObject89, MsgObject90, MsgObject91, MsgObject92, MsgObject93, MsgObject94, MsgObject95,
MsgObject96, MsgObject97, MsgObject98, MsgObject99, MsgObject100, MsgObject101, MsgObject102, MsgObject103,
MsgObject104, MsgObject105, MsgObject106, MsgObject107, MsgObject108, MsgObject109, MsgObject110, MsgObject111,
MsgObject112, MsgObject113, MsgObject114, MsgObject115, MsgObject116, MsgObject117, MsgObject118, MsgObject119,
MsgObject120, MsgObject121, MsgObject122, MsgObject123, MsgObject124, MsgObject125, MsgObject126, MsgObject127,
NO_OFAVAILABLECANMESSAGESLOTS
};
Example for Init:
void CAN0FD_RxInit(uint32 CAN_Id, uint32 AcceptanceMask, uint8 dlc, uint32 ExtFrame, IfxMultican_MsgObjId MsgObj_Id)
{
/* create CAN node config */
IfxMultican_Can_NodeConfig canNodeConfig;
IfxMultican_Can_Node_initConfig(&canNodeConfig, &g_Multican.drivers.can);
g_Multican.drivers.UserCanRxIds[MsgObj_Id] = CAN_Id;
if (ExtFrame == 11)
{
ExtFrame = FALSE;
}
else
{
ExtFrame = TRUE;
}
/* create message object config */
canMsgObjConfig.msgObjCount = 1;
canMsgObjConfig.control.topMsgObjId = 252;
canMsgObjConfig.control.bottomMsgObjId = 253;
/* Destination Message object */
{
/* create message object config */
IfxMultican_Can_MsgObjConfig canMsgObjConfig;
IfxMultican_Can_MsgObj_initConfig(&canMsgObjConfig, &g_Multican.drivers.canNode0);
canMsgObjConfig.msgObjId = MsgObj_Id;
canMsgObjConfig.messageId = CAN_Id;
canMsgObjConfig.acceptanceMask = AcceptanceMask;
canMsgObjConfig.frame = IfxMultican_Frame_receive;
canMsgObjConfig.control.messageLen = IfxMultican_DataLengthCode_64;
canMsgObjConfig.control.extendedFrame = ExtFrame;
canMsgObjConfig.control.matchingId = TRUE;
canMsgObjConfig.control.fastBitRate = FALSE; /* fast bit rate enable/disable */
/* initialize message object */
IfxMultican_Can_MsgObj_init(&g_Multican.drivers.UserCanMessages[MsgObj_Id], &canMsgObjConfig);
}
}
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Feb 25, 2021 3:10:47 GMT
Post by sinai1 on Feb 25, 2021 3:10:47 GMT
I have a prebuilt of the library, please help me to review and answer the question of my previous post i assume some information but it compiles like a charm. regards Attachments:NewMultiCAN.rar (4.76 KB)
|
|
|
|
CAN FD
Feb 25, 2021 10:03:05 GMT
Post by dn on Feb 25, 2021 10:03:05 GMT
Hi Sinai1, can you clarify which AURIX you are using, TC275 or TC375? The reason for asking is because the CAN module is completely different on the TC375.
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Feb 25, 2021 16:40:09 GMT
Post by sinai1 on Feb 25, 2021 16:40:09 GMT
Im Using TC275_Dx
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Mar 5, 2021 14:31:30 GMT
Post by sinai1 on Mar 5, 2021 14:31:30 GMT
Hi Admins any news about this, I have try it Connecting TX & RX pins but i have no signals on TC275 DC.
Regards.
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Apr 5, 2021 14:18:33 GMT
Post by sinai1 on Apr 5, 2021 14:18:33 GMT
Hello Admins. any news about this?
|
|
|
|
CAN FD
Apr 12, 2021 8:22:45 GMT
Post by Admin on Apr 12, 2021 8:22:45 GMT
We should soon have a tested example for this!
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Jun 24, 2021 13:08:26 GMT
Post by sinai1 on Jun 24, 2021 13:08:26 GMT
Dear Admins, do we have any news or example?
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Jul 12, 2021 14:11:32 GMT
Post by sinai1 on Jul 12, 2021 14:11:32 GMT
Hi Admins, any answer about this?
|
|
sinai1
Junior Member
Posts: 79
|
CAN FD
Sept 21, 2021 13:22:43 GMT
Post by sinai1 on Sept 21, 2021 13:22:43 GMT
Any news?
|
|
