|
|
Post by sam234 on Apr 8, 2018 18:43:30 GMT
Hey, I have recently purchased a shieldbuddy but all of the chips i will be using will be 3.3v. Is there a way to change the voltage of the board to 3.3V?
|
|
wiken
New Member
Posts: 45 
|
Post by wiken on Apr 9, 2018 5:53:30 GMT
Hi. Check the thread: Rebuild TC275 from 5V to 3.3V. You have to change 2 resistors and so on, no big deal. The only thing is that one resistor is a E192-series one. \Wiken  |
|
