DM
New Member
Working with the ShieldBuddy
Posts: 8 
|
Post by DM on Jun 3, 2020 9:58:32 GMT
Hi,
I want to use the integrated UART of the ShieldBuddy with the tricore-gcc toolchain, so no arduino available.
The only things i need to know are which Ports are used and the settings of the UART-config.
Thanks in advance
|
|
|
|
Post by Admin on Jun 16, 2020 8:44:24 GMT
Sorry, we do not understand the question!
|
|
DM
New Member
Working with the ShieldBuddy
Posts: 8
|
Post by DM on Jun 17, 2020 23:14:37 GMT
I want to use the UART in the same way as the SerialASC class you provided for the ArduinoIDE, so I don't need an extra USB-Serial-adapter to communicate. I am using an other toolchain, not the arduino adaptation, so i don't have access to SerialASC. But I want to use the convenient USB-Port on the ShieldBuddy. This way I have to set up the ASCLIN-Module myself and I want to know which Pins are used from TC275 to the FTDI-Chip.
From this post I've read, that ASCLIN3 of the TC275 is used, which narrows it down to a few. Now I need to know which pins are used and if there are any other settings I have to consider.
Thanks in advance
|
|
|
|
Post by Admin on Jun 18, 2020 8:11:44 GMT
The SerialASC function uses ASC3 and pins P32.2 for RX and P15.7 for TX.
|
|
