Post by mjb on Feb 13, 2017 13:46:34 GMT
The latest version of the Arduino IDE add-in for the ShieldBuddy has been released and is at:
www.hitex.co.uk/fileadmin/uk-files/downloads/ShieldBuddy/ShieldBuddyMulticoreIDE.zip
www.hitex.co.uk/fileadmin/uk-files/downloads/ShieldBuddy/ShieldBuddyMulticoreIDE.exe
www.hitex.co.uk/fileadmin/uk-files/downloads/ShieldBuddy/ShieldBuddyPinoutRevB_UM.pdf
The passwords are all "ShieldBuddy".
This version allows the use of the Spi channel on MISO = p50, MOSI = p51, SCK = p52 with slave selects on p53 and p10. The Spi channel on MISO = p12, MOSI = p11 SCK = p13 is now supported.
NOTE: This can only be used with the Hightec toolchain v4.6.6.0-infineon-1.1. If you are using the latest v4.9.1.0-infineon-1.1 then please uninstall the existing v4.9.1.0 toolchain. Then get the previous v4.6.6.0 toolchain from here:
www.hitex.co.uk/fileadmin/uk-files/downloads/ShieldBuddy/AurixFreeEntryToolChain.zip
Unzip this to a temporary directory and run the setup as you did before. The Arduino IDE add-in should then work.
